What is infrared thermography, and how does a thermal camera measure temperature?

Science of WarmthUpdated 4 min read

Infrared thermography is the technique of measuring surface temperature from the infrared radiation a surface gives off, and showing the result as an image. A thermal camera does not see heat itself. It measures radiation and calculates temperature from it, which is why its readings depend on the surface as well as on how warm it is.

How does a thermal camera work?

Every object above absolute zero emits electromagnetic radiation. Near room and body temperature, almost all of it lies in the long-wave infrared, at wavelengths of roughly 8 to 14 micrometers. Human eyes cannot see it. Glass blocks it, which is why thermal cameras use lenses made of germanium or similar materials.

Most thermal cameras use a microbolometer sensor. It is a grid of tiny elements, each of which warms slightly when infrared falls on it. The warming changes the element’s electrical resistance, the camera reads the change, and software converts each reading to a temperature and a color.

What does the image actually show?

Each pixel shows the infrared arriving from one small patch of surface. That radiation has three parts: what the surface emits because of its own temperature, what it reflects from its surroundings, and a small contribution from the air in between. The camera’s software assumes values for these and reports a temperature.

The key assumption is emissivity, a number from 0 to 1 that describes how efficiently a surface emits. See our article on emissivity.

SurfaceTypical emissivityHow it reads
Human skinAbout 0.98Close to true
Most fabrics, paint, wood0.85 to 0.95Close to true
Oxidized metal0.6 to 0.8Needs a corrected setting
Polished or bare metal, foil0.03 to 0.1Unreliable. Shows reflections.

How accurate is a thermal camera?

Uncooled cameras are commonly specified at about plus or minus 2 °C (3.6 °F) or 2% of the reading, whichever is larger. Their sensitivity is much finer. Many can distinguish differences of 0.05 °C (0.09 °F) or less between neighboring pixels.

So a thermal camera is very good at showing that one area is warmer than another, and less good at stating the exact temperature of either. For an exact figure, a contact sensor on the surface is the better instrument.

What is thermography used for?

  • Buildings. Finding missing insulation, air leaks and moisture.
  • Electrical and mechanical maintenance. Spotting overloaded connections and failing bearings before they fail.
  • Product development. Seeing how evenly a heater warms, or where an enclosure leaks heat.
  • Medicine and screening. Mapping skin temperature. Skin temperature is not core body temperature, and thermal screening for fever has well-documented limits.
  • Search, security and wildlife. Finding warm bodies against a cooler background.

What can go wrong?

  • Shiny surfaces. They emit little and reflect a lot, so they read wrong and may show the operator’s own reflection.
  • Automatic color scales. A small difference can be displayed as a dramatic contrast. Check the scale.
  • Surfaces only. The camera cannot see through clothing, walls or glass.
  • Viewing angle. Readings fall off at steep angles.
  • Distance. Small hot spots blur into their surroundings.

Key takeaways

  • A thermal camera measures infrared radiation and calculates temperature from it.
  • Results depend on emissivity. Skin and fabrics read well. Bare metal does not.
  • Cameras are better at showing differences than exact values.
  • A thermal image shows surfaces only.
  • Always check the temperature scale before comparing two images.

FAQ

Can a thermal camera see through clothing?

No. It reads the outer surface of whatever is in front of it. Warmth conducted through thin clothing can make the surface warmer, which is sometimes mistaken for seeing through.

Can a thermal camera measure body temperature?

It measures skin surface temperature, which varies with surroundings and blood flow and is lower than core temperature. It cannot replace a clinical thermometer.

Why does a metal surface look cold in a thermal image?

Bare metal has low emissivity. It emits little infrared and reflects its surroundings, so the camera reads the reflection of the cooler room and not the metal’s own temperature.

What is NETD?

Noise equivalent temperature difference. It is the smallest temperature difference a camera can distinguish, usually given in millikelvin. Lower is better.

Do thermal cameras work in the dark?

Yes. They sense emitted infrared and need no light.

Sources

  1. ASTM E1933, Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  2. ISO 18434-1, Condition monitoring and diagnostics of machines: Thermography, Part 1: General procedures
  3. Vollmer and Möllmann, Infrared Thermal Imaging: Fundamentals, Research and Applications (Wiley-VCH)
  4. U.S. Food and Drug Administration, Thermal Imaging Systems (Infrared Thermographic Systems / Thermal Imaging Cameras)