THERMAL LAB · PB-03 · PUBLICATIONS
Thermal architecture glossary
The terms used across the research section, defined in plain language. For a wider glossary of thermal comfort terms, see the Knowledge hub.
In this section
A to E
Air gap. A layer of still air between two surfaces. A good insulator, and the space a heat-reflective surface needs in order to work.
Architecture, thermal. The arrangement of layers, heat sources and controls that decides where heat is made, where it travels and where it is lost.
Bellows effect. The pumping of warm air out of clothing by body movement.
Clo. A unit of clothing insulation. One clo equals 0.155 m²·K/W.
Conduction. Heat transfer through direct contact.
Convection. Heat transfer by moving air or liquid.
Core. The trunk and its organs, which the body keeps near 37 °C (98.6 °F).
Duty cycle. The share of time a switched heater is on.
Emissivity. How efficiently a surface emits infrared radiation, from 0 to 1. Low-emissivity surfaces reflect radiant heat.
Energy. Power added up over time. Measured here in watt-hours.
H to P
Heat budget. An account of heat entering and leaving a system, in watts.
Heat path. The route heat takes from its source to where it is finally lost.
Heat-reflective layer. A low-emissivity layer that returns radiant heat toward its source.
Heat spreader. A thin layer that conducts heat sideways to even out temperature.
Insulation layer. A layer that resists heat flow. In the HEATJAC stack it sits between the heat source and the body.
Latent heat. Energy absorbed or released when a material changes phase at constant temperature.
Layer order. The sequence of layers in a stack, which sets the direction of heat flow.
Microclimate. The air between skin and outer clothing.
Passive. Working without a power source.
Phase change material. A material that stores and releases heat by melting and solidifying at a set temperature.
Power. The rate of energy use. Measured in watts.
PTC. Positive temperature coefficient. A material whose electrical resistance rises with temperature, used in self-regulating heaters.
R to Z
Radiation. Heat transfer by infrared, needing no contact and no air.
Self-regulating. Able to limit its own temperature without a sensor or switch.
Steady state. The condition in which temperatures have stopped changing because heat in equals heat out.
Thermal Cell Array. The HEATJAC layout of thermal zones on the torso.
Thermal conductivity. A material's ability to conduct heat, in W/m·K. Lower means better insulation.
Thermal mass. The capacity of an object to store heat.
Time constant. The time a system takes to cover about 63% of a temperature change.
Uniformity. How evenly temperature is distributed over an area.
Warm-up curve. Temperature plotted against time from a cold start.
Watt. The unit of power. One joule per second.
Watt-hour. The unit of energy used on this site. One watt for one hour.
Zone. A defined area of the body where a thermal element is placed.
See also the thermal comfort glossary in the Knowledge hub.