THERMAL LAB · ME-00 · METHODS
Methods
A result is only as good as the method behind it. These pages describe how we measure thermal systems, what each measurement can support and where its limits are.
In this section
- ME-01 How we test
- ME-02 Method: thermal imaging
- ME-03 Method: contact temperature sensing
- ME-04 Method: power and energy measurement
- ME-05 Method: warm-up curves
- ME-06 Method: steady state and stability
- ME-07 Method: temperature uniformity
- ME-08 Method: side-by-side comparison
- ME-09 Method: cold conditions testing
- ME-10 Method: surface temperature limits
- ME-11 Method: repeatability and uncertainty
- ME-12 Standards we reference
- ME-13 Reading a thermal report
Our testing is engineering and development testing. It informs design decisions. It is not a certification or a regulatory approval, and where a recognized standard applies, our reports name it.
The pages follow the order of a test: the principles, the three kinds of measurement, the quantities we derive from them, and how the result is reported.
- ME-01How we test
The principles behind every HEATJAC measurement: define the question, control the conditions, record everything, state only what the data supports.
- ME-02Method: thermal imaging
What a thermal camera measures, what it cannot, and how the HEATJAC Thermal Lab uses imaging to map heat distribution.
- ME-03Method: contact temperature sensing
How the HEATJAC Thermal Lab places and reads contact temperature sensors, and why sensor position decides what a reading means.
- ME-04Method: power and energy measurement
How the HEATJAC Thermal Lab measures the electrical power and energy a heating system uses, in watts and watt-hours, at the load.
- ME-05Method: warm-up curves
A warm-up curve shows how fast a thermal system reaches working temperature. How HEATJAC records and reads it.
- ME-06Method: steady state and stability
How the HEATJAC Thermal Lab checks that a heating system holds its temperature over hours, and what the pattern of cycling reveals.
- ME-07Method: temperature uniformity
How evenly does a heater warm its area? The HEATJAC Thermal Lab method for measuring and reporting temperature uniformity.
- ME-08Method: side-by-side comparison
How the HEATJAC Thermal Lab compares two materials or heating elements fairly: same conditions, same sensors, one variable changed.
- ME-09Method: cold conditions testing
How cold changes a thermal test, and how the HEATJAC Thermal Lab approaches cold soak, cold start and operation at low temperature.
- ME-10Method: surface temperature limits
How hot can a surface near skin be, and for how long? The published basis for surface temperature limits and how HEATJAC applies it.
- ME-11Method: repeatability and uncertainty
Every measurement has a spread. How the HEATJAC Thermal Lab estimates it, reports it and decides whether a difference is real.
- ME-12Standards we reference
The published test standards behind thermal claims for materials, clothing and equipment, and how the HEATJAC Thermal Lab uses them.
- ME-13Reading a thermal report
What a HEATJAC Thermal Lab report contains, section by section, and the questions to ask of any thermal test report.