THERMAL LAB · TA-00 · THERMAL ARCHITECTURE

Thermal architecture

Thermal architecture is the arrangement of layers, heat sources and controls that decides where heat is made, where it travels and where it is lost. These pages set out the principles, in the order we apply them.

In this section
  1. TA-01 What is thermal architecture?
  2. TA-02 The microclimate: the air you wear
  3. TA-03 Heat off the skin
  4. TA-04 The five jobs of a thermal system
  5. TA-05 The heat budget
  6. TA-06 Layer order
  7. TA-07 Zones and placement
  8. TA-08 Passive first
  9. TA-09 Control and limits
  10. TA-10 Power architecture
  11. TA-11 An architecture, not a garment
  12. TA-12 Cooling is the same problem, reversed
  13. TA-13 The HEATJAC design rules

A heater is a component. An architecture is a decision about everything around it. Two products with the same heater and the same battery can feel completely different, because one sends its heat into the wearer's microclimate and the other sends it into the outside air.

Read the pages in order for the full argument, or go straight to the question you have.

  1. TA-01
    What is thermal architecture?

    Thermal architecture sees warmth as a system: source, path, storage, loss and control. Why HEATJAC designs the path before the heater.

  2. TA-02
    The microclimate: the air you wear

    The thin layer of air between skin and clothing decides whether you feel warm. Why HEATJAC engineers that air layer and not the fabric.

  3. TA-03
    Heat off the skin

    Heating skin directly limits how much warmth you can add. Heating the air around the body does not. The reasoning behind the HEATJAC heat path.

  4. TA-04
    The five jobs of a thermal system

    Every thermal product makes, keeps, moves, stores or removes heat. A simple framework HEATJAC uses to specify any warming or cooling design.

  5. TA-05
    The heat budget

    A thermal design is an energy account. How HEATJAC sets up a heat budget in watts and watt-hours before any prototype is built.

  6. TA-06
    Layer order

    The same materials in a different order give a different result. How HEATJAC orders heat-reflective, insulating and heating layers.

  7. TA-07
    Zones and placement

    Warm the core and the body warms its own hands and feet. How HEATJAC decides where on the body thermal zones are placed.

  8. TA-08
    Passive first

    The cheapest watt is the one you do not lose. Why every HEATJAC design starts with heat retention before a heat source is added.

  9. TA-09
    Control and limits

    A thermal system needs a ceiling as well as a source. How HEATJAC thinks about self-limiting elements, sensing and temperature limits.

  10. TA-10
    Power architecture

    Chemical, battery or wall power: HEATJAC regards the energy source as a replaceable layer of the thermal system, sized last and swapped freely.

  11. TA-11
    An architecture, not a garment

    A heated jacket replaces your jacket. A thermal architecture works under the one you already own. Why HEATJAC builds the layer and not the coat.

  12. TA-12
    Cooling is the same problem, reversed

    The architecture that holds warm air against the body can also carry heat away. How HEATJAC applies one thermal platform to heat and cold.

  13. TA-13
    The HEATJAC design rules

    Ten rules HEATJAC applies to every thermal design, from passive first to state only what the measurements support.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program