THERMAL LAB · TA-10 · THERMAL ARCHITECTURE

Power architecture

We regard the energy source as one more layer of the system. It should be sized last, replaced easily and never locked to the product. The architecture around it is what the user keeps.

In this section
  1. TA-01 What is thermal architecture?
  2. TA-02 The microclimate: the air you wear
  3. TA-03 Heat off the skin
  4. TA-04 The five jobs of a thermal system
  5. TA-05 The heat budget
  6. TA-06 Layer order
  7. TA-07 Zones and placement
  8. TA-08 Passive first
  9. TA-09 Control and limits
  10. TA-10 Power architecture
  11. TA-11 An architecture, not a garment
  12. TA-12 Cooling is the same problem, reversed
  13. TA-13 The HEATJAC design rules

Three kinds of source

SourceStrengthsLimits
Air-activated warmersNo electronics, long duration, light, nothing to chargeFixed output, single use
Rechargeable battery with electric elementsAdjustable, instant, reusableWeight, cold reduces capacity, needs charging
Wall or vehicle powerUnlimited durationTethered

Each suits a different day. A hunter far from an outlet, a nurse on a twelve hour shift near one, and a soldier who cannot carry a spare battery all need warmth, and none of them should need a different garment.

The structure outlasts the source

The HEATJAC CORE harness holds air-activated warmers. The layers that keep and direct the heat do not depend on that choice.

We design this way because energy technology changes faster than the human torso. A pocket that holds today's warmer can hold a better element later.

Sizing the source

Sizing starts from the heat budget and not from a catalog. Work out the shortfall in watts after the passive structure has done its job, multiply by the hours required, and add the losses between the battery and the element. The answer is in watt-hours, and it decides the weight the user carries.

Standard connections

A proprietary battery ties a user to one supplier and one charger. Standard power connections are available everywhere and let the user pick the capacity they want to carry. As a principle, we favor standard power wherever a design uses a battery.

Cold changes the picture for any battery. See lithium cells in the cold.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program