THERMAL LAB · TA-01 · THERMAL ARCHITECTURE
What is thermal architecture?
Thermal architecture is the practice of designing the whole path that heat takes, from where it is made to where it finally leaves, before choosing any single component. The heater comes last.
In this section
- TA-01 What is thermal architecture?
- TA-02 The microclimate: the air you wear
- TA-03 Heat off the skin
- TA-04 The five jobs of a thermal system
- TA-05 The heat budget
- TA-06 Layer order
- TA-07 Zones and placement
- TA-08 Passive first
- TA-09 Control and limits
- TA-10 Power architecture
- TA-11 An architecture, not a garment
- TA-12 Cooling is the same problem, reversed
- TA-13 The HEATJAC design rules
A system has five parts
Every thermal system, from a winter jacket to a battery enclosure, can be described with the same five parts.
| Part | Question it answers |
|---|---|
| Source | Where does the heat come from, and how much is there? |
| Path | Which way does the heat travel once it exists? |
| Storage | What holds heat, and for how long? |
| Loss | Where does heat leave, and by which route? |
| Control | What keeps the temperature inside its limits? |
Most heated products are designed source first. A heating element is chosen, a battery is sized to run it, and the garment is sewn around both. The result works on a bench and disappoints on a person, because the path and the losses were never designed.
Why the path comes first
A person at rest produces about 100 W of heat. A typical battery heated jacket adds 7 to 15 W. The body is already the largest heater in the system by a wide margin, so the first engineering question is not how to add heat. It is how to stop wasting the heat that is already there, and how to make sure any added heat ends up where it helps.
That is a question about layers, air gaps, surfaces and openings. It is architecture.
What changes when you design this way
- Added heat is placed where it warms the air around the body and not one patch of skin.
- Surfaces that face the body are chosen for how they handle radiant heat.
- Insulation goes on the outside of the heat source, so heat has one easy direction to travel.
- The energy source is treated as a replaceable layer and not as the product.
The HEATJAC platform is one application of these ideas to the human torso. The same reasoning applies to a camera in the cold or a medicine in transit. Continue with the microclimate, which is the thing a wearable thermal system is really built to manage.