THERMAL LAB · EN-00 · ENGINEERING NOTES
Engineering notes
Each note takes one design decision or one common assumption and works it through. They are short, they use numbers, and they are written to be argued with.
In this section
- EN-01 Why a heated jacket heats two rectangles
- EN-02 Warm air beats hot pads
- EN-03 The watt is the unit of warmth
- EN-04 What a data sheet does not tell you
- EN-05 Thin is a thermal property
- EN-06 Why we measure in watt-hours
- EN-07 The jacket you already own
- EN-08 The cost of an air leak
- EN-09 Feet and hands follow the core
- EN-10 Heating people, not rooms
- EN-11 Cold is a battery problem too
- EN-12 Why 45 °C is not hot, and why it is
- EN-13 The operating room as a test environment
- EN-14 Designing for the wash
- EN-15 What thermal cameras get wrong
Notes are numbered in the order they were written. They reflect our reasoning at the time of writing and are revised when measurements change our view.
- EN-01Why a heated jacket heats two rectangles
Most battery heated jackets warm two or three small panels and leave the rest to chance. An engineering note from the HEATJAC Thermal Lab on why.
- EN-02Warm air beats hot pads
Why broad, gentle warmth feels warmer than a small hot surface with the same power. An engineering note from the HEATJAC Thermal Lab.
- EN-03The watt is the unit of warmth
Temperature describes a state. Warmth is a flow of energy, measured in watts. An engineering note from the HEATJAC Thermal Lab on thinking in watts.
- EN-04What a data sheet does not tell you
A material data sheet reports one sample in one condition. An engineering note from the HEATJAC Thermal Lab on the gap between rating and result.
- EN-05Thin is a thermal property
Thickness decides whether a thermal layer gets worn at all. An engineering note from the HEATJAC Thermal Lab on designing for low profile.
- EN-06Why we measure in watt-hours
Milliamp-hours cannot be compared between batteries. Watt-hours can. An engineering note from the HEATJAC Thermal Lab on stating energy properly.
- EN-07The jacket you already own
The best outer layer for a thermal system is the one the wearer already has. An engineering note from the HEATJAC Thermal Lab.
- EN-08The cost of an air leak
Movement pumps warm air out of clothing. An engineering note from the HEATJAC Thermal Lab on the bellows effect and what to do about it.
- EN-09Feet and hands follow the core
Cold fingers are usually a message about the torso. An engineering note from the HEATJAC Thermal Lab on why core warmth comes first.
- EN-10Heating people, not rooms
A room heater warms hundreds of kilograms of air and walls to keep one person comfortable. An engineering note from the HEATJAC Thermal Lab.
- EN-11Cold is a battery problem too
The colder it gets, the more heat you need and the less your battery gives. An engineering note from the HEATJAC Thermal Lab on designing around it.
- EN-12Why 45 °C is not hot, and why it is
The same temperature is mild in air and too warm against skin. An engineering note from the HEATJAC Thermal Lab on reading temperature in context.
- EN-13The operating room as a test environment
Why a cold operating room is one of the hardest places to keep a person warm, and what it taught HEATJAC. An engineering note.
- EN-14Designing for the wash
Cleaning is where thermal products age. An engineering note from the HEATJAC Thermal Lab on designing systems that survive real care.
- EN-15What thermal cameras get wrong
Thermal images are persuasive and easy to misread. An engineering note from the HEATJAC Thermal Lab on emissivity, reflections and color scales.