THERMAL LAB · EN-10 · ENGINEERING NOTES
Heating people, not rooms
To make one person comfortable, a room heater warms all the air in the room, then the furniture, then the walls. The person is a small part of what gets heated. There is a more direct way to think about it.
In this section
- EN-01 Why a heated jacket heats two rectangles
- EN-02 Warm air beats hot pads
- EN-03 The watt is the unit of warmth
- EN-04 What a data sheet does not tell you
- EN-05 Thin is a thermal property
- EN-06 Why we measure in watt-hours
- EN-07 The jacket you already own
- EN-08 The cost of an air leak
- EN-09 Feet and hands follow the core
- EN-10 Heating people, not rooms
- EN-11 Cold is a battery problem too
- EN-12 Why 45 °C is not hot, and why it is
- EN-13 The operating room as a test environment
- EN-14 Designing for the wash
- EN-15 What thermal cameras get wrong
The arithmetic of a room
A modest room holds about 40 cubic meters of air, roughly 48 kg. Raising it by 5 °C (9 °F) takes about 70 Wh, which is small. The real cost is that the room leaks. Walls, windows and ventilation carry heat away continuously, and a heater of 1,000 to 1,500 W runs for hours to hold the temperature.
The person in the room needs to shed about 100 W to be comfortable. A kilowatt or more is being spent to arrange the surroundings so that this happens at the right rate.
Three scales of warming
| Scale | What is heated | Typical power |
|---|---|---|
| Building | All rooms | Several kilowatts |
| Room | One room's air and surfaces | 1,000 to 1,500 W |
| Person | The air and surfaces at the body | Tens of watts |
Each step down saves an order of magnitude.
What personal warming can and cannot do
It can keep a person comfortable in a room held several degrees cooler than usual. Research on personal comfort systems in offices has shown that people accept a wider range of room temperatures when they have local control of their own warmth.
It cannot protect pipes from freezing or keep a whole household comfortable at once. It is a complement to room heating and a way to turn the room down.
Where the heat should land
Feet and lower legs are usually coldest, because warm air rises and floors are cool. The hands come next. Warmth aimed at those places does more for comfort than the same energy added to the air at head height.
The link to our work
A thermal layer under a jacket is personal warming at its smallest scale. The same reasoning extends outward, to a seat, a desk or a corner of a room. In each case the questions are the same. Where is the person, where are they cold, and what is the least energy that fixes it?
Radiant heat
Radiant heaters warm surfaces and not air. A person in front of one feels warm at once while the air stays cool. That makes radiant heat the natural tool for warming people directly, provided it lands where it is wanted.
See the watt is the unit of warmth and the Knowledge guide to staying warm at home without heating.