THERMAL LAB · EN-06 · ENGINEERING NOTES
Why we measure in watt-hours
Battery capacity is advertised in milliamp-hours. That unit cannot be compared between products unless the voltage is the same, and it rarely is. We state energy in watt-hours, with voltage and amp-hours alongside.
In this section
- EN-01 Why a heated jacket heats two rectangles
- EN-02 Warm air beats hot pads
- EN-03 The watt is the unit of warmth
- EN-04 What a data sheet does not tell you
- EN-05 Thin is a thermal property
- EN-06 Why we measure in watt-hours
- EN-07 The jacket you already own
- EN-08 The cost of an air leak
- EN-09 Feet and hands follow the core
- EN-10 Heating people, not rooms
- EN-11 Cold is a battery problem too
- EN-12 Why 45 °C is not hot, and why it is
- EN-13 The operating room as a test environment
- EN-14 Designing for the wash
- EN-15 What thermal cameras get wrong
The problem with mAh
A milliamp-hour is a quantity of charge. Energy is charge multiplied by voltage. A 10,000 mAh power pack and a 10,000 mAh tool battery hold very different amounts of energy.
| Battery | Labeled capacity | Voltage | Energy |
|---|---|---|---|
| USB power pack | 10,000 mAh | 3.7 V | 37 Wh |
| Heated jacket pack | 5,000 mAh | 7.4 V | 37 Wh |
| 12 V tool battery | 3,000 mAh | 10.8 V | 32 Wh |
The first two hold the same energy though one label shows twice the number.
Watt-hours are directly useful
Energy in watt-hours divided by power in watts gives hours. A 37 Wh pack running a 10 W heater lasts about 3.7 hours before losses. No other unit gives the answer so simply.
Label and delivered energy
The label states what the cells hold. What reaches the heater is less.
- Voltage conversion inside the pack loses 10 to 15% or more.
- Cables and connectors lose a little.
- Cold reduces what the cells will give.
- Packs stop before they are completely empty to protect the cells.
We measure delivered energy at the load and use that for run time.
Comparing heat sources
Watt-hours also let unlike sources be compared. An air-activated warmer, a battery and a phase change pack can all be described by the heat they deliver in watt-hours and the period over which they deliver it. Per gram, a chemical warmer compares very well with a battery, which is part of why it remains a sound choice.
Rules and travel
Air transport limits for lithium batteries are written in watt-hours. So are shipping regulations. Knowing the watt-hour figure for a pack answers practical questions that mAh cannot.
Our convention
In every HEATJAC document, battery capacity appears as watt-hours first, then voltage and amp-hours in brackets, for example 37 Wh (3.7 V, 10 Ah). Measured energy is given to one decimal place.
See power and energy measurement and the Knowledge guide to heated vest batteries.