THERMAL LAB · MA-00 · MATERIALS

Materials library

A thermal system is built from a small number of material classes, each doing one of the five jobs. This library describes each class as an engineer would need to know it: how it works, the figures that matter and how it fails.

In this section
  1. MA-01 Heat-reflective films and fabrics
  2. MA-02 Aerogel and foam insulation
  3. MA-03 Heat spreaders
  4. MA-04 Resistive heating films and fabrics
  5. MA-05 PTC self-regulating materials
  6. MA-06 Phase change materials
  7. MA-07 Air-activated warmers
  8. MA-08 Textiles and carriers
  9. MA-09 Lithium cells in the cold

The pages describe material classes and published physical properties. They do not name the specific materials or suppliers used in HEATJAC products.

JobMaterial classes
KeepHeat-reflective films and fabrics, aerogel and foam insulation
MoveHeat spreaders
MakeResistive heating films, PTC materials, air-activated warmers
StorePhase change materials
Carry and powerTextiles and carriers, lithium cells
  1. MA-01
    Heat-reflective films and fabrics

    How metallized films and fabrics return radiant heat, the role of emissivity and air gaps, and how they fail. From the HEATJAC materials library.

  2. MA-02
    Aerogel and foam insulation

    Thin insulation for thermal systems: aerogel composites, closed-cell foams and air-gap structures compared. From the HEATJAC materials library.

  3. MA-03
    Heat spreaders

    How thin metal and graphite sheets move heat sideways to even out hot spots. From the HEATJAC materials library.

  4. MA-04
    Resistive heating films and fabrics

    How carbon fiber, printed carbon, graphene and metal-trace heaters turn current into heat, and how they differ. From the HEATJAC materials library.

  5. MA-05
    PTC self-regulating materials

    Positive temperature coefficient heaters raise their own resistance as they warm and settle at a ceiling. From the HEATJAC materials library.

  6. MA-06
    Phase change materials

    Phase change materials absorb and release heat at a fixed temperature as they melt and freeze. From the HEATJAC materials library.

  7. MA-07
    Air-activated warmers

    The chemistry and behavior of iron-oxidation warmers, and why they suit a passive thermal architecture. From the HEATJAC materials library.

  8. MA-08
    Textiles and carriers

    The fabrics, meshes and structures that hold thermal elements in place, and what they must do. From the HEATJAC materials library.

  9. MA-09
    Lithium cells in the cold

    What low temperature does to lithium-ion batteries, why charging cold cells is a problem, and how to design around it. From the HEATJAC materials library.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program