THERMAL LAB · MA-01 · MATERIALS

Heat-reflective films and fabrics

A heat-reflective material returns infrared radiation that would otherwise be absorbed and passed on. A thin layer of metal does the work. Everything else in the material is there to carry and protect it.

In this section
  1. MA-01 Heat-reflective films and fabrics
  2. MA-02 Aerogel and foam insulation
  3. MA-03 Heat spreaders
  4. MA-04 Resistive heating films and fabrics
  5. MA-05 PTC self-regulating materials
  6. MA-06 Phase change materials
  7. MA-07 Air-activated warmers
  8. MA-08 Textiles and carriers
  9. MA-09 Lithium cells in the cold

How it works

All surfaces emit infrared according to their temperature and their emissivity, a number between 0 and 1. Skin and most fabrics are close to 1. Clean aluminum is around 0.03 to 0.05. A surface with low emissivity also reflects most of the infrared that strikes it. Face it toward a warm body across an air space and it sends the body's radiant heat back.

Forms

FormConstructionNotes
Metallized filmVacuum-deposited aluminum on polymer filmHighest reflectance, no breathability, noisy
Metallized fabricAluminum deposited on a woven or nonwovenFlexible, quieter, lower reflectance
Foil laminateMetal foil bonded to fabric or foamDurable, stiffer
Printed patternMetallic dots or shapes on a liningBreathable, covers only part of the area

The figures that matter

  • Emissivity or emittance of the body-facing surface, with the test standard named.
  • Area coverage, for perforated or printed materials.
  • Durability of the metal layer to abrasion, flexing and washing.
  • Breathability, where moisture has to escape.

The air gap

A heat-reflective surface works only when it faces an air space. In contact with another material it conducts heat like any thin film and its low emissivity counts for nothing. Building in and keeping that air space is the main design task.

How they fail

  • The metal layer oxidizes, abrades or washes away, and emissivity rises.
  • A protective topcoat is applied too thick, and the surface behaves like the coating and not the metal.
  • The material is laminated flat between layers and the air gap is lost.
  • Dirt or moisture films the surface.

In the HEATJAC architecture

The heat-reflective layer faces the body in every product. In REFLECT it lines the vest. In CORE it is the innermost layer of each pocket. See layer order and the research program on heat-reflective surfaces.

Knowledge background: what is emissivity and how space blankets work.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program