THERMAL LAB · MA-08 · MATERIALS

Textiles and carriers

The textile parts of a thermal system do not make or store heat. They decide where everything sits, whether air can move where it should, and whether the product survives being worn. They fail more often than the thermal parts.

In this section
  1. MA-01 Heat-reflective films and fabrics
  2. MA-02 Aerogel and foam insulation
  3. MA-03 Heat spreaders
  4. MA-04 Resistive heating films and fabrics
  5. MA-05 PTC self-regulating materials
  6. MA-06 Phase change materials
  7. MA-07 Air-activated warmers
  8. MA-08 Textiles and carriers
  9. MA-09 Lithium cells in the cold

What the carrier has to do

  • Hold each thermal element in a fixed position against a moving body.
  • Keep the air spaces the design depends on.
  • Let air reach elements that need it and block it where it should stay still.
  • Carry load without stretching out of shape.
  • Stay comfortable against a base layer for a full shift.
  • Survive cleaning.

Materials by function

FunctionTypical materialWhy
Structural panels and strapsWoven nylon or polyesterStrong, stable, abrasion resistant
Breathable back panelsSpacer meshAirflow and low weight
Element pocketsMesh or light woven fabricLets heat and air through
Lining toward the bodySoft knit or the heat-reflective layer itselfComfort and radiant return
ClosuresBuckles, hook and loop, zippers, snapsAdjustment and access

Pockets

A pocket is a small piece of engineering. Its body-side wall and its outer wall want opposite properties. Toward the body, resistance to heat. Outward, as little as possible. Its opening has to make loading easy and unloading by accident impossible. Its size has to hold the element flat without bunching.

Fit is a thermal property

A harness that rides up, gaps or twists moves the thermal zones away from where they were designed to be and opens paths for warm air to leave. Adjustment range, strap geometry and sizing are thermal design decisions as much as comfort ones.

Washing

Cleaning is where thermal products age. Heat-reflective surfaces lose metal. Foams take a set. Adhesives let go. Connectors corrode. The design answer is to make the thermal layers removable, so the carrier can be cleaned as a textile and the layers handled separately, and to state care instructions that match what the materials tolerate.

Regulated environments

Clinical and industrial settings place their own demands on fabrics, including limits on lint and rules on what may be worn in particular areas. A thermal layer worn under the regulated outer garment avoids most conflicts, which is one reason the architecture sits where it does.

Related: designing for the wash and an architecture, not a garment.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program