THERMAL LAB · TA-11 · THERMAL ARCHITECTURE
An architecture, not a garment
A heated jacket asks you to give up the jacket you chose. A thermal architecture goes under it. HEATJAC builds the warm layer and leaves the outer layer to the wearer, the employer or the uniform regulation.
In this section
- TA-01 What is thermal architecture?
- TA-02 The microclimate: the air you wear
- TA-03 Heat off the skin
- TA-04 The five jobs of a thermal system
- TA-05 The heat budget
- TA-06 Layer order
- TA-07 Zones and placement
- TA-08 Passive first
- TA-09 Control and limits
- TA-10 Power architecture
- TA-11 An architecture, not a garment
- TA-12 Cooling is the same problem, reversed
- TA-13 The HEATJAC design rules
The problem with heating a jacket
Outer garments are chosen for reasons that have nothing to do with heat. A surgeon's gown is sterile. A lineman's coat is arc rated. A soldier's uniform is issued. A commuter's coat is the one they like. Building heat into the outer layer forces a choice between warmth and all of those other requirements.
It is also the worst place for a heater. Elements sewn into a shell sit far from the body with the cold just outside them, and a good share of their output leaves through the fabric they are sewn to.
What goes under instead
The HEATJAC platform is a low-profile harness worn on the base layer. It sits under scrubs, uniforms, protective equipment and ordinary coats. Nothing is meant to be visible when it is worn. Any jacket worn over it becomes the wall of a warmed space.
What this allows
- One thermal product serves many outer garments, including ones that cannot be altered.
- The outer layer can be washed, replaced or regulated without touching the thermal system.
- An organization can equip a team without changing its uniform program.
- The same harness can carry cooling elements in hot conditions.
Architecture as intellectual property
Two issued U.S. patents cover this wearable architecture, the arrangement of panels, liners and pockets that hold thermal elements. Further filings are in preparation. The patents protect the structure, which is where the performance comes from.
For the direct comparison with battery heated jackets, see Why HEATJAC. For the patents, see patents and IP.