THERMAL LAB · TA-12 · THERMAL ARCHITECTURE
Cooling is the same problem, reversed
Keeping a person cool uses the same physics as keeping them warm, with the direction of the heat reversed. An architecture built around the microclimate can serve both, which is why the HEATJAC platform is designed to carry cooling elements as well as warming ones.
In this section
- TA-01 What is thermal architecture?
- TA-02 The microclimate: the air you wear
- TA-03 Heat off the skin
- TA-04 The five jobs of a thermal system
- TA-05 The heat budget
- TA-06 Layer order
- TA-07 Zones and placement
- TA-08 Passive first
- TA-09 Control and limits
- TA-10 Power architecture
- TA-11 An architecture, not a garment
- TA-12 Cooling is the same problem, reversed
- TA-13 The HEATJAC design rules
What changes and what does not
In the cold, the goal is to hold heat in the air layer next to the body. In the heat, the goal is to take heat out of that same layer. The zones on the torso, the need to stay clear of equipment, and the limits on what can touch skin are the same.
| Design question | Warming | Cooling |
|---|---|---|
| Where is the element placed? | Torso zones | Torso zones |
| Which way should heat flow? | From element to microclimate | From body to element |
| Where does insulation go? | Body side of the element | Outer side of the element |
| What limits contact temperature? | Upper skin limit | Lower skin limit and condensation |
Why cooling is harder
The body sheds heat mainly by evaporating sweat. Under a surgical gown, body armor or a chemical suit, sweat cannot evaporate, and the body's main cooling route is closed. A cooling element then has to absorb heat directly, and absorbing takes mass. Ice absorbs about 93 Wh per kilogram as it melts. A hard-working person can produce several hundred watts. The arithmetic sets the size of the problem.
Where an architecture helps
Because cooling capacity is heavy, placement and direction matter even more than in warming. Insulation on the outer side of a cold element keeps it absorbing body heat and not heat from the hot air outside. Elements that sit in fixed pockets stay where the large blood flow is.
One platform through the year
A product that only works in winter spends half the year in a locker. One harness with seasonal elements is used year round, and a team learns one system.
Our cooling research is described in personal cooling. Background is in the Knowledge guide to personal cooling.