THERMAL LAB · TA-07 · THERMAL ARCHITECTURE

Zones and placement

Where heat is placed on the body matters as much as how much there is. We place thermal zones on the torso, because the torso is where the body decides whether the hands and feet are allowed to be warm.

In this section
  1. TA-01 What is thermal architecture?
  2. TA-02 The microclimate: the air you wear
  3. TA-03 Heat off the skin
  4. TA-04 The five jobs of a thermal system
  5. TA-05 The heat budget
  6. TA-06 Layer order
  7. TA-07 Zones and placement
  8. TA-08 Passive first
  9. TA-09 Control and limits
  10. TA-10 Power architecture
  11. TA-11 An architecture, not a garment
  12. TA-12 Cooling is the same problem, reversed
  13. TA-13 The HEATJAC design rules

The body has a priority list

When the body senses cold, it protects the core organs first. It narrows the blood vessels that feed the skin, hands and feet, and warm blood stays central. Cold fingers are often a signal about the torso and not about the fingers.

It follows that warmth applied at the core does more than warm the core. A torso that is clearly warm gives the body less reason to restrict flow to the extremities. The Knowledge article on core warmth and cold hands covers the physiology.

Zones on the torso

The HEATJAC platform arranges its pockets as zones on the front and back of the torso, a layout we call the Thermal Cell Array. Three things drive the placement.

  • Coverage. Zones are spread so that warmed air reaches the whole space under the jacket.
  • Clearance. Nothing sits where a strap, a plate carrier, a lead apron or a stethoscope has to go.
  • Movement. The wearer has to bend, reach and sit without a zone shifting or pressing.

Placement is task specific

A surgeon stands still for hours with arms forward. A lineman climbs. A sentry sits. Each task changes which zones matter and what must stay clear, which is why zones are configurable and elements can be added or left out.

Beyond the torso

Hands, feet and face lose heat fast and have little mass. They are hard to heat directly without bulk or loss of dexterity. Our approach is to secure the core first and take extremities as a second step, with elements that sit in purpose-made pockets of a garment and never hang loose.

Zone placement is one of the first things we test when a design changes. See temperature uniformity.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program