THERMAL LAB · TA-04 · THERMAL ARCHITECTURE

The five jobs of a thermal system

Every thermal product does some mix of five jobs. It makes heat, keeps it, moves it, stores it or removes it. Naming which jobs a design must do, and in what order of priority, is the first step of every program we run.

In this section
  1. TA-01 What is thermal architecture?
  2. TA-02 The microclimate: the air you wear
  3. TA-03 Heat off the skin
  4. TA-04 The five jobs of a thermal system
  5. TA-05 The heat budget
  6. TA-06 Layer order
  7. TA-07 Zones and placement
  8. TA-08 Passive first
  9. TA-09 Control and limits
  10. TA-10 Power architecture
  11. TA-11 An architecture, not a garment
  12. TA-12 Cooling is the same problem, reversed
  13. TA-13 The HEATJAC design rules

The five jobs

JobWhat it meansTypical means
MakeAdd heat that was not thereChemical warmers, electric heating elements
KeepSlow the loss of existing heatInsulation, still air, heat-reflective surfaces
MoveCarry heat from where it is to where it is neededHeat spreaders, air gaps, liquids
StoreHold heat for later, or absorb itThermal mass, phase change materials
RemoveTake unwanted heat awayEvaporation, cold packs, ventilation

Order matters

Keeping is almost always cheaper than making. A watt that is not lost costs nothing to supply, weighs nothing and never runs flat. So a sound design does the keeping first, then the moving, and adds a source only for what is still missing.

Many products reverse this. They add a strong source to a leaky structure and then need a large battery to feed it. The battery adds weight, cost and charging, and the user still feels cold wherever the element is not.

Using the framework

When a team sends us a brief, we rewrite it in these terms. A cold chain shipper has to keep and store. A drone battery in winter has to make, keep and control. A cooling vest for a surgeon has to remove and store, inside clothing that cannot be opened.

The same harness can do different jobs with different inserts. The HEATJAC platform holds warming elements for cold work and cooling elements for hot work in the same pockets, because the architecture around them, the layers and the air gap, serves both.

Next: the heat budget, where the five jobs get numbers.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program