THERMAL LAB · RP-04 · RESEARCH PROGRAMS

Program: thin insulation

Insulation is easy if thickness is free. Under a uniform it is not. This program looks for materials that insulate well at a few millimeters, bend with the body, recover after compression and tolerate heat on one side. Stage: bench.

In this section
  1. RP-01 Program: the wearable microclimate
  2. RP-03 Program: heat-reflective surfaces
  3. RP-04 Program: thin insulation
  4. RP-05 Program: heating elements
  5. RP-08 Program: personal cooling
  6. RP-09 Program: comfort for cold-sensitive people

The question

In the HEATJAC stack, the insulation layer sits between the heat source and the body. It has to be thin enough to disappear under clothing and good enough to turn the heat outward. Which materials meet both, and how do they hold up in use?

What we ask of a candidate

PropertyWhy it matters
Low thermal conductivityMore resistance per millimeter
Performance under compressionStraps and body weight squeeze it
Flexibility and stretchIt has to move with the torso
Temperature toleranceOne face sits next to a heat source
Stability over timeNo crumbling, shedding or permanent set
SupplyMore than one source, consistent between lots

Candidates under study

Aerogel-loaded foams and fabrics offer the lowest conductivity per thickness. Closed-cell foams are consistent and inexpensive. Engineered air-gap structures use geometry in place of material. Each has a weakness, and the right choice depends on the position in the stack. Background is in aerogel and foam insulation.

How we compare them

Every candidate goes through the same screen.

  • A fixed heat source on one face and temperature recorded on the other, over a fixed time.
  • The same test with the sample compressed.
  • The same test after flexing.
  • A thermal image of the cold face, to see whether heat comes through evenly or in patches.

A material that looks excellent on a data sheet sometimes fails the patch test, because perforations, seams or uneven loading let heat through in spots. The image shows what the single number hides.

What we have learned so far

Thickness matters less than the data sheets suggest once a layer is thin, and consistency matters more. A slightly less insulating foam that behaves the same everywhere is often the better engineering choice. See thin is a thermal property.

Put the lab to work.

Send a brief. A mutual nondisclosure agreement comes first.

Start a program