THERMAL LAB · RP-01 · RESEARCH PROGRAMS
Program: the wearable microclimate
This is the founding program. The question is how to hold an even layer of warm air around the torso, under whatever the wearer already has on, with the least bulk and the least energy. Stage: product, with continuing research.
The question
A torso under a jacket is a small room with a heater in the middle, the body, and walls that leak. How should a thin structure be arranged inside that room so the air stays warm everywhere and not only next to a heat source?
Why it matters
Operating rooms are commonly held between 20 and 24 °C (68 and 75 °F), and the people working in them stand still for hours in thin clothing. The same pattern, low activity in a cool or cold place with restrictions on what can be worn, repeats on guard posts, in cold storage, in vehicles and in stadium seats. In each case the wearer cannot simply add a thicker coat.
What the program has produced
- The patented panel and pocket architecture behind HEATJAC CORE and HEATJAC REFLECT.
- The layer order that directs warmth into the air under the outer garment. See layer order.
- The zone layout on the torso. See zones and placement.
What we are working on now
- How evenly the air layer warms with different zone layouts and different outer garments.
- How much warm air is lost through movement, and which fit changes reduce it.
- How thin the structure can be made while keeping the air gap it depends on.
- Extended sizes and fits, so that the same performance holds across body shapes.
How we measure it
Thermal imaging shows the distribution. Contact sensors at fixed points on a torso form record the air gap temperature over time. Each change to the structure is run against the previous version under the same conditions. Methods are described in temperature uniformity and side-by-side comparison.
Products from this program: HEATJAC CORE and HEATJAC REFLECT.