What is radiant heat loss, and how much body heat leaves by radiation?

Science of WarmthUpdated 10 min read

Radiant heat loss is the infrared energy your skin and clothing give off to cooler surfaces around you, with no contact and no moving air needed. Indoors at rest it is the largest single route of body heat loss, about 60% in a widely used clinical reference, and it grows when walls, windows or ceilings are cold.

What is radiant heat loss?

Every object warmer than absolute zero emits electromagnetic radiation. At body temperature that radiation is invisible long-wave infrared. Your skin sends infrared out in every direction, and the walls, furniture, windows and people around you send infrared back. Radiant heat loss is the net difference: what you emit minus what you absorb from your surroundings.

That net exchange is why radiation is so easy to overlook. It does not depend on the air touching you. A room can hold a comfortable air temperature and still pull heat from you quickly if the surfaces you face are colder than your skin. It also works across empty space, which is why the sun warms your face on a still winter day and why a clear night sky cools exposed skin and frost forms on car roofs.

Physiologists group body heat exchange into four routes: radiation, convection, conduction and evaporation. Our guide to how the body loses heat covers all four. This article focuses on the one that dominates at rest indoors.

How much body heat is lost by radiation?

The StatPearls chapter on temperature regulation, published through the National Library of Medicine, attributes about 60% of total body heat loss to radiation. It assigns about 22% to evaporation of sweat and moisture, about 15% to conduction and convection into the surrounding air, and about 3% to conduction through direct contact with solid objects.

RouteApproximate share of total heat lossSource note
RadiationAbout 60%StatPearls, 2023
EvaporationAbout 22%StatPearls, 2023
Conduction and convection to airAbout 15%StatPearls, 2023
Conduction to solid objectsAbout 3%StatPearls, 2023

Treat these numbers as a picture of a typical indoor setting rather than a fixed rule. The split moves with conditions. Wind and movement raise convection. Exercise and heat push evaporation to the top, because sweating becomes the main way to shed heat when the surroundings are close to or above skin temperature. Sitting on cold metal or lying on cold ground raises conduction sharply. Radiation stays large whenever the surfaces around you are cooler than you are.

A second way to see the size of radiation is the heat transfer coefficient. In thermal manikin measurements published in the International Journal of Biometeorology, de Dear and colleagues found a whole-body radiative heat transfer coefficient of about 4.5 W/m²K for both standing and seated postures. In still air, the matching natural convection coefficient was about 3.4 W/m²K standing and 3.3 W/m²K seated. Radiation moves more heat than still-air convection for each degree of temperature difference.

How does the Stefan-Boltzmann law explain radiant heat loss?

The Stefan-Boltzmann law says the energy a surface radiates rises with the fourth power of its absolute temperature, multiplied by its emissivity. In plain terms: warmer surfaces radiate much more, and a surface that is a good emitter radiates more than a poor one at the same temperature.

For a person, the net radiant exchange depends on three things:

  • Skin or clothing surface temperature. Bare skin usually sits around 33 °C (91 °F) at rest in comfortable conditions; the outer surface of clothing is cooler.
  • The temperature of surrounding surfaces. Cold windows, exterior walls, metal and open sky increase the gap.
  • Emissivity. Human skin is close to a perfect emitter. A 2020 PLOS ONE study of 65 volunteers measured a mean skin emissivity of 0.972, ranging from 0.96 to 0.99, with no significant difference by skin pigmentation. Most literature uses 0.98.

Because skin emissivity is so high, the skin is also an excellent absorber of infrared. That is why a heat lamp or a sunny window feels warm right away. Our article on emissivity, reflectance and absorptance explains why a good emitter is always a good absorber, and why a low-emissivity surface reflects most incoming infrared.

The fourth-power relationship matters less across the small temperature range of a room than it does in industry, so engineers often simplify radiant exchange to a linear coefficient, like the 4.5 W/m²K figure above. Using that coefficient, bare skin at 33 °C (91 °F) facing surfaces at 20 °C (68 °F) loses about 59 W per square meter by radiation. Facing surfaces at 15 °C (59 °F), the loss rises to about 81 W per square meter, roughly a third more, even if the air temperature reading has not changed.

What is mean radiant temperature, and why do cold walls feel colder than the air?

Mean radiant temperature is the single surface temperature that would produce the same radiant exchange with your body as the real mix of surfaces around you. A room with a large cold window, a warm radiator and ordinary walls has one mean radiant temperature for a person standing in it, weighted by how much of that person’s view each surface fills.

Comfort standards treat radiation as its own factor for this reason. ANSI/ASHRAE Standard 55, Thermal Environmental Conditions for Human Occupancy, lists thermal radiation alongside air temperature, air speed and humidity as the environmental factors that decide whether people are thermally comfortable, with clothing and activity as the personal factors. Thermal comfort engineers commonly combine air temperature and mean radiant temperature into an operative temperature, which tracks how warm a space feels better than air temperature alone.

This explains several familiar experiences:

  • Sitting next to a large window in winter feels chilly even when the thermostat reads normal, because the glass is far colder than the room air.
  • Older buildings with poorly insulated exterior walls feel colder than their air temperature suggests.
  • A warm, sunlit wall or a radiant panel makes a room feel comfortable at a lower air temperature.
  • Operating rooms combine cool air, large cool surfaces and lightly clothed patients and staff, so radiant loss is a large part of why people feel cold there. Our article on why operating rooms are cold covers the reasons the rooms are kept that way.

How do radiation, convection, conduction and evaporation compare?

Each route has a different driver, so each needs a different fix. Clothing systems that perform well in the cold manage all four at once.

RouteWhat drives itWhat reduces it
RadiationTemperature difference between your surface and surrounding surfaces or open sky; emissivity of the surfacesWarmer surroundings, clothing layers, still air gaps, low-emissivity (heat-reflective) layers facing an air space, shelter from open sky
ConvectionAir moving across skin or clothing: wind, drafts, body movement, the bellows effect of loose layersWind-resistant shells, closed cuffs and collars, layers that trap still air
ConductionDirect contact with colder solids or liquids; water conducts heat far faster than airInsulating pads and soles, staying dry, avoiding contact with cold metal, ground and water
EvaporationSweat and moisture changing to vapor at the skin; breathing out humid airAvoiding overheating, venting before sweating, base layers that move moisture, staying dry

Conduction gets its own treatment in our article on conductive heat loss, including why cold water is so dangerous.

How can you reduce radiant heat loss?

Radiant loss falls when the effective surface temperature you present to the world drops, or when the surfaces you face get warmer. Clothing and shelter do both.

Clothing layers. Each layer is warmer on the inside and cooler on the outside. The outermost surface, not your skin, does the radiating to the room. Because it is cooler than skin, it radiates less. Several thin layers with air between them work better than a single thin layer.

Still air. The air trapped between skin and clothing, and between layers, is the main insulator in almost every garment. Our article on the clothing microclimate explains how that thin air layer decides how warm you feel.

Low-emissivity, heat-reflective layers. A metallized layer with low emissivity radiates very little infrared from its own surface and reflects most of the infrared that reaches it. NASA’s reference compilation of spacecraft thermal-control coatings lists very low thermal emittance values for bright metallic surfaces, which is the property these layers rely on. In clothing, a heat-reflective layer returns part of the body’s radiated heat and cuts what the layer sends outward. Our articles on radiant barriers in clothing and heat-reflective linings go deeper.

Space blankets. Emergency blankets use a thin metallized film for the same reason. They are light, compact and effective against radiant loss, especially when combined with insulation and shelter from wind. See how space blankets work.

Heat-reflective layers have clear limits, and knowing them is what makes them useful:

  • They need an air gap. A low-emissivity surface works on radiation only when it faces an air space. Pressed directly against skin or another fabric, heat moves through it by conduction instead.
  • They do not stop wind. Moving air carries heat away by convection, so a shell or wind-resistant layer is still needed.
  • They do not stop conduction. Lying on cold ground or snow needs an insulating pad underneath.
  • They work best inside a system. Combined with insulation and a shell, a heat-reflective layer adds warmth with very little bulk.

Warmer surroundings. Indoors, insulated walls, window coverings, radiant heaters and simply moving away from cold glass all raise mean radiant temperature. Outdoors at night, a roof, tree cover or a tent blocks the cold sky and cuts radiant loss noticeably.

HEATJAC designs garment systems with heat-reflective layers that help the body keep its own heat; see our technology page for how the architecture fits together.

Key takeaways

  • Radiant heat loss is infrared energy exchanged between your body and surrounding surfaces, with no contact or air movement required.
  • StatPearls attributes about 60% of total body heat loss to radiation in typical indoor conditions, ahead of evaporation, convection and conduction.
  • Skin emissivity is about 0.97 to 0.98, so skin is both a strong emitter and a strong absorber of infrared.
  • Mean radiant temperature explains why cold windows, walls and operating rooms feel colder than the air reading.
  • Clothing layers, still air, heat-reflective layers facing an air gap, space blankets and warmer surroundings all reduce radiant loss; none of them replace wind protection or insulation from cold ground.

Frequently asked questions

Is radiant heat loss the same as infrared heat loss?

Yes. At body and room temperatures, radiated heat is long-wave infrared. “Radiant,” “radiative” and “radiation” heat loss all describe the same process.

Why do I feel cold in a room that is at a normal temperature?

The thermostat measures air, not surfaces. If the walls, windows or floor are cold, your body radiates more heat to them, so the room feels colder than the air temperature suggests. Mean radiant temperature captures this effect.

Does dark or light skin lose more heat by radiation?

No meaningful difference has been shown. A 2020 PLOS ONE study measured skin emissivity between 0.96 and 0.99 and found no significant difference by pigmentation. Infrared emissivity does not follow visible color.

Do heat-reflective layers work if they touch the skin?

They work best facing an air space. Pressed directly against skin or another fabric, heat moves through mainly by conduction, so the low-emissivity surface has less to do. Garments place these layers where an air gap can form.

Why do I get cold sleeping under a clear night sky?

A clear sky has a very low effective radiant temperature, so exposed skin and sleeping bags radiate heat upward with little coming back. Clouds, a tent roof or tree cover block much of that loss.

Which matters more outdoors, radiation or wind?

In still conditions radiation is a major route of loss; in wind, convection rises quickly and often dominates. Good cold-weather clothing addresses both: a shell for wind, insulation and still air for conduction and convection, and outer surfaces or heat-reflective layers for radiation.

Sources

  1. Physiology, Temperature Regulation, StatPearls, NCBI Bookshelf, National Library of Medicine (2023)
  2. The effect of constitutive pigmentation on the measured emissivity of human skin, PLOS ONE (2020)
  3. Convective and radiative heat transfer coefficients for individual human body segments, International Journal of Biometeorology, de Dear, Arens, Zhang and Oguro (1997)
  4. ANSI/ASHRAE Standard 55: Thermal Environmental Conditions for Human Occupancy, ASHRAE (2023)
  5. Solar Absorptance and Thermal Emittance of Some Common Spacecraft Thermal-Control Coatings (Reference Publication 1121), NASA Goddard Space Flight Center (1984)

About HEATJAC. HEATJAC is a thermal architecture company founded by an anesthesiologist. We design garment systems that help the body keep its own heat and spread added warmth across the torso, and we publish this knowledge hub because the science of staying warm should be public. HEATJAC products are not medical devices and are not intended to diagnose, treat, cure or prevent any disease.