THERMAL LAB · FA-10 · FIELDS
Buildings and personal comfort
Buildings spend a great deal of energy holding every room at one temperature that suits nobody exactly. Personal comfort devices warm or cool the individual and let the building relax its target.
In this section
- FA-01 Wearables and protective equipment
- FA-02 Medical and care products
- FA-03 Batteries and electronics
- FA-04 Field and outdoor equipment
- FA-05 Defense and public safety
- FA-06 Seating, cabins and mobility
- FA-07 Cold chain and temperature-sensitive payloads
- FA-08 Sleep, shelter and rescue
- FA-09 Sports and performance
- FA-10 Buildings and personal comfort
- FA-11 Products for working animals
The problem
Comfort standards for shared spaces aim to satisfy about four occupants in five, which accepts that one in five will not be. Some are cold while others are warm, because people differ in body size, clothing, activity and preference. The usual response is a compromise temperature and a steady stream of complaints.
The idea of personal comfort
Give each person a small, low-power way to adjust their own conditions, and let the room drift a few degrees. Studies of personal comfort systems in offices report that occupants stay comfortable across a wider range of room temperatures when they control local warming or cooling.
The devices
| Device | Typical power | Notes |
|---|---|---|
| Heated seat or seat pad | 15 to 40 W | Large contact area, very effective |
| Foot warmer | 20 to 100 W | Addresses the coldest region |
| Small radiant panel | 100 to 400 W | Warms what it faces |
| Desk fan | 2 to 20 W | Cooling by air movement |
| Wearable thermal layer | Zero to about 10 W | Goes with the person |
For comparison, a portable room heater draws 1,000 to 1,500 W.
What makes a good one
- It warms the person and not the air.
- It reaches the feet and hands, which are usually the complaint.
- It responds in seconds, since people adjust it when they feel uncomfortable.
- Its touchable surfaces stay within limits.
- It is quiet and unobtrusive in a workplace.
What we measure
- Temperature rise at the body positions that matter.
- Energy used, compared with heating the room to the same comfort.
- Response time.
- Surface temperatures in normal and misuse conditions.
Our research
Our interest in this field grew out of the wearable work. The question is the same at both scales: where is the person, where are they cold, and what is the least energy that fixes it?
Homes
For households, personal warming is a way to stay comfortable when heating the whole home is expensive. It is of particular use to older people, who feel the cold more and often sit for long periods.
Reading: heating people, not rooms, staying warm at the office and recommended room temperatures.