THERMAL LAB · FA-06 · FIELDS
Seating, cabins and mobility
A seated person exchanges heat with the seat over a large area for a long time. That makes seating one of the most effective places to warm or cool someone, and one of the most demanding for surface temperature control.
In this section
- FA-01 Wearables and protective equipment
- FA-02 Medical and care products
- FA-03 Batteries and electronics
- FA-04 Field and outdoor equipment
- FA-05 Defense and public safety
- FA-06 Seating, cabins and mobility
- FA-07 Cold chain and temperature-sensitive payloads
- FA-08 Sleep, shelter and rescue
- FA-09 Sports and performance
- FA-10 Buildings and personal comfort
- FA-11 Products for working animals
The problem
Heating a cabin to warm its occupant is slow and expensive in energy. In an electric vehicle it costs range. In a wheelchair or stroller there is no cabin at all. The seat, in contact with the back and thighs, can deliver comfort directly for a fraction of the power.
What is particular to seating
- Pressure. Body weight compresses everything, which changes insulation and reduces blood flow in the skin.
- Long contact. Hours in one position. Surface limits have to be set for that.
- Users who cannot shift. Wheelchair users and small children may not feel or avoid a warm spot.
- Moisture. A seat blocks evaporation where it touches the body.
- Vehicle power. Available in cars, scarce in mobility devices.
Design questions
| Question | Consideration |
|---|---|
| Where should heat go? | Lower back and thighs for warmth, with even coverage |
| How is the limit enforced? | Self-regulating elements plus sensing, verified under load |
| What is behind the heater? | Insulation, so heat goes to the person and not the frame |
| How is moisture handled? | Spacer layers and ventilation paths |
| What powers it? | Vehicle supply, or standard portable power |
What we measure
- Surface temperature under load, across the contact area.
- Warm-up time from a cold soak.
- Energy to hold comfort, compared with heating the surrounding air.
- Behavior with a blanket or coat over the occupant.
- Stability over hours.
Mobility devices
Wheelchair users are exposed to cold with little movement to generate heat and often with reduced sensation. Strollers hold small children who cannot report discomfort. In both cases a conservative, well-verified design matters more than power. We run these as programs where surface temperature verification leads.
Shared ground with wearables
The stack is the same as in a garment pocket, turned to face a seated body: a heat source, insulation behind it, a controlled surface in front. Our methods carry over directly.
Reading: surface temperature limits and the Knowledge article on staying warm in a wheelchair.