THERMAL LAB · FA-07 · FIELDS
Cold chain and temperature-sensitive payloads
A temperature-sensitive payload has a band it must stay within and a journey that tries to push it out. Passive packaging is a thermal architecture problem of exactly the kind we work on, with heat flowing in the opposite direction.
In this section
- FA-01 Wearables and protective equipment
- FA-02 Medical and care products
- FA-03 Batteries and electronics
- FA-04 Field and outdoor equipment
- FA-05 Defense and public safety
- FA-06 Seating, cabins and mobility
- FA-07 Cold chain and temperature-sensitive payloads
- FA-08 Sleep, shelter and rescue
- FA-09 Sports and performance
- FA-10 Buildings and personal comfort
- FA-11 Products for working animals
The problem
Vaccines, biological samples and many medicines have narrow temperature ranges. Too warm and they degrade. Frozen, some are destroyed. The package may sit on a loading dock in summer and in an unheated van in winter on the same trip.
The components of a passive shipper
| Component | Job |
|---|---|
| Insulation | Slows heat flow in either direction |
| Phase change packs | Hold the band by melting or freezing at the target temperature |
| Payload space | Protected from direct contact with frozen packs |
| Outer carton | Mechanical protection |
| Data logger | Records what happened |
What goes wrong
- Packs conditioned at the wrong temperature.
- Payload touching frozen gel packs and freezing.
- Thermal bridges at lids and corners.
- Duration claims based on a single ambient profile.
- No protection against cold, only against heat.
What we measure
- Temperature at several points in the payload space over time, against a defined ambient profile.
- The effect of pack arrangement and quantity.
- Where heat enters, by thermal imaging of the outer surfaces.
- Hold time in both hot and cold conditions.
Small and last-mile containers
Our lab suits small containers: carry cases, courier bags, sample boxes and point-of-care coolers. These are often the weakest link, used for the last step by people without training in cold chain practice. Formal qualification of pharmaceutical shippers belongs with accredited package testing laboratories. We work on the design and comparison stage before it.
The people in the cold chain
Cold storage staff work for hours at temperatures from chilled to deep frozen, often with low activity while picking or checking. Their thermal comfort is a wearable problem, and the HEATJAC architecture was designed for that profile. See the industrial and cold chain page.
Reading: phase change materials and the Knowledge articles on pharmaceutical cold chain work and working in a freezer.