THERMAL LAB · FA-01 · FIELDS
Wearables and protective equipment
Clothing and protective equipment decide how a person exchanges heat with the world. We design and test thermal systems for garments, uniforms, gloves, footwear, headwear and base layers, for cold and for heat.
In this section
- FA-01 Wearables and protective equipment
- FA-02 Medical and care products
- FA-03 Batteries and electronics
- FA-04 Field and outdoor equipment
- FA-05 Defense and public safety
- FA-06 Seating, cabins and mobility
- FA-07 Cold chain and temperature-sensitive payloads
- FA-08 Sleep, shelter and rescue
- FA-09 Sports and performance
- FA-10 Buildings and personal comfort
- FA-11 Products for working animals
The problem
Protective equipment protects against one hazard and often creates a thermal one. Armor, chemical suits and arc-rated clothing trap heat. Thin clinical attire in cool rooms loses it. Adding a thermal function must not compromise the protection the garment exists to provide.
What usually goes wrong
- A heater is added to an existing garment with no change to the layers around it.
- Elements are placed where they are easy to sew and not where they work.
- Battery and cables conflict with other equipment.
- The product tests warm on a table and uneven on a body.
- Bulk makes the wearer leave it off.
What we measure
| Question | Measurement |
|---|---|
| Is the warmth even? | Air gap temperature at multiple torso positions |
| Does it reach the wearer or the outside? | Skin side and outer surface temperatures |
| How long does it last? | Energy per hour and delivered battery energy |
| Does it hold its level? | Stability over the intended duration |
| Does it fit under the equipment? | Thickness as worn, clearance checks |
Kinds of program
- Evaluation of an existing heated or cooling garment against a stated requirement.
- Selection of heating elements, insulation or heat-reflective materials for a new design.
- Integration of a thermal layer under a specific uniform or protective system.
- Development of a cooling configuration for work in heat.
What we bring
Two issued U.S. patents on wearable thermal architecture, products in the field built on them, and a lab set up for exactly this scale of system. Where the HEATJAC architecture suits a partner's product, licensing by field of use is available. See licensing the architecture.
Reading: an architecture, not a garment and the Knowledge guide to modular heating and cooling garments.