THERMAL LAB · FA-11 · FIELDS
Products for working animals
Working dogs and horses operate in the same weather as their handlers, with different bodies and no way to say they are too hot or too cold. Thermal products for them need the same discipline as products for people, adapted to a different animal.
In this section
- FA-01 Wearables and protective equipment
- FA-02 Medical and care products
- FA-03 Batteries and electronics
- FA-04 Field and outdoor equipment
- FA-05 Defense and public safety
- FA-06 Seating, cabins and mobility
- FA-07 Cold chain and temperature-sensitive payloads
- FA-08 Sleep, shelter and rescue
- FA-09 Sports and performance
- FA-10 Buildings and personal comfort
- FA-11 Products for working animals
What is different
| Factor | Dogs | Consequence |
|---|---|---|
| Cooling | Mainly panting, very little sweating | Heat builds quickly under any covering |
| Coat | Already an insulating layer | Added layers change how the coat works |
| Body shape | Horizontal torso, chest close to the ground | Belly and chest are exposed to snow and cold ground |
| Paws | Direct ground contact | Cold and hot surfaces both injure |
| Communication | None in words | Limits must be conservative and built in |
The cold problem
A working dog alternates between effort and waiting, like its handler. During a long static period in cold or wet conditions, especially lying on cold ground, a dog loses heat through the chest and belly. A thermal layer has to stay in place on a moving four-legged body and must not restrict gait.
The heat problem
Heat is the greater hazard for working dogs. A dog in a vest or harness under sun has reduced ability to shed heat. Cooling products have to remove heat without blocking the airflow through the coat that the dog relies on.
Design principles
- Fixed position. Elements must not shift onto joints or under straps.
- Built-in limits. The animal cannot report a hot spot. Self-limiting elements and conservative ceilings are required.
- No chewable hazards. Batteries and cables have to be protected or avoided.
- Compatibility. The product has to work with existing harnesses and protective vests.
- Easy for the handler. Fitted in seconds, checked at a glance.
What we measure
- Surface temperatures on the animal side, worst case.
- Distribution over the covered area.
- Duration of warming and cooling elements.
- Stability of position during movement, on a form.
How we work in this field
We provide engineering measurement and thermal design. Fit, behavior and welfare assessment belong with veterinary professionals and experienced handlers, and a program in this field should include them from the start.
Related thinking
The architecture carries over: a heat source or sink in a fixed pocket, insulation on the correct side, a controlled surface toward the body. See layer order and surface temperature limits.